current position:home page>Products>Environmental Instrument>

LI-200R Pyranometer

Updated:2023-07-13

Brand: LI-COR
Model: LI-200R
Description: The LI-200R Pyranometer is meant to be used outdoors under unobstructed natural daylight conditions. It measures global solar radiation—the combination of direct and diffuse solar radiation—in the 400
Data download

Feedback
WeChat

QQ

Online Service

Product Details

LI-200R Pyranometer Description：

Brochure

The LI-200R Pyranometer is meant to be used outdoors under unobstructed natural daylight conditions. It measures global solar radiation—the combination of direct and diffuse solar radiation—in the 400 to 1100 nm range. Measurement units are in watts per square meter (W m^-2).

Ideal for agricultural, meteorological, solar energy, and environmental research, the LI-200R is available with a variety of cable lengths and compatibility with most data loggers.

LI-200R Character

Weather resistant and durable in long-term outdoor deployments

Measures global solar radiation under unobstructed natural daylight conditions

Uniform sensitivity up to 82° incident angle

Detachable sensor simplifies installation and removal, making it ideal for platforms with complex cabling

LI-200R Working Principle

The LI-200R measures global solar radiation with an unfiltered silicon photodiode. Its measurements correspond closely to first-class thermopiles when used outdoors under unobstructed natural daylight conditions.

The crown of the sensor rapidly sheds water, and also physically blocks light from outside the hemisphere of sensitivity, providing a precise cosine response.

LI-200R Pyranometer Specifications：

Absolute Calibration	Calibrated against an Eppley Precision Spectral Pyranometer (PSP) under natural daylight conditions. Calibration uncertainty under these conditions is estimated as ± 3% typical, within ± 60° angle of incidence.*
Sensitivity	Typically 75 μA per 1,000 W m^-2
Linearity	Maximum deviation of 1% up to 3,000 W m^-2
Response Time	Less than 1 μs (2 m cable terminated into a 147 Ohm load)
Temperature Dependence	± 0.15% per °C maximum
Cosine Correction	Cosine corrected up to 82° angle of incidence
Azimuth	< ± 1% error over 360° at 45° elevation
Tilt	No error induced from orientation
Operating Temperature Range	−40°C to 65°C
Relative Humidity Range	0% to 100% RH, Non-Condensing
Detector	High stability silicon photovoltaic detector (blue enhanced)
Sensor Housing	Weatherproof anodized aluminum body with acrylic diffuser and stainless steel hardware; O-ring seal on the sensor base
Size	2.36 cm diameter × 3.63 cm (0.93” × 1.43”)
Weight	24 g head; 60 g base and cable (2 m) with screws
Cable Length	2 m, 5 m, 15 m, 50 m (6.5’, 16.4’, 49.2’, 164’)