WET KIT and WET-2 Sensor

WET KIT and WET-2 Sensor Description：

User's Manual Datasheet

Measures Water content, EC and Temperature

Measures directly within the root zone

Rapid checks of growing conditions

Ideal for precision irrigation

In just 5 seconds the WET Sensor checks 3 crucial variables that influence plant growth: water content, temperature and pore water conductivity (ECp), the EC of the water that is available to the plant.

Vital tool for precision horticulture

The WET Sensor is used throughout horticulture, especially by soft fruit growers and for crops grown in protected environments, where correct growing conditions are critical to both yield and flavour. The compact sensor can be inserted directly into the growing medium with minimal disturbance to either roots or shoots, and provides information for process optimisation, checking growing condition uniformity and precision irrigation.

WET Kit

WET Sensors are normally ordered as a complete kit that includes a WET Sensor, an HH2 Moisture Meter and a handy carry case. There are three types of Kit – each with a different set of substrate calibrations, including coir, peat and mineral wool. Please see below for further information on substrate calibrations and kits.

Fertigation and hydroponics

Where plants are grown in artificial substrates using hydroponic or fertigation systems, nutrients are routinely supplied in irrigation water. Nutrient levels are controlled by monitoring the water content and conductivity (EC) and adjusting the injection of liquid fertiliser into the irrigation water. The Delta-T WET Sensor excels in monitoring this vital information for precision irrigation.

Container-grown shrubs and trees

Nutrients are sometimes provided by fertigation but are often provided by Controlled Release Fertilisers (CRF).

The rate at which these are taken up depends on several factors, including the weather conditions and precision irrigation regime.

The Delta-T Devices WET Sensor can be used to measure the EC within the growing media and so take much of the guesswork out of this process.

Soil salinity

If the irrigation water is recycled or abstracted from rivers and aquifers with high levels of dissolved salts, over time there can be a build up of soil salinity. Soil salinisation will eventually reduce crop yields. The WET Sensor is fast and efficient for sampling soil salinity, ensuring that farmers have the essential information they need to take remedial action as quickly as possible.

Readout and data logging

For portable applications, readout and data storage are handled by the HH2 Moisture Meter. Alternatively, the WET Sensor can be connected to a GP2 or GP1 Data Logger, making it possible to monitor growing conditions over a period of hours, days or longer. The GP2 and GP1’s smart relay capabilities allow them to control water content in response to EC or temperature.

WET Sensors used aboard China’s Tiangong-2 Space Station

The WET Sensor has been used by Chinese astronauts to conduct horticultural experiments in space. find out more.

Soil and horticultural substrate calibrations

If the WET Sensor is purchased with an HH2 Moisture Meter (as part of the WET Kit) it will be equipped with calibrations for generic mineral soils, organic soils, sand soils, clay soils, coir (coco fibre), peat based potting mixes, greenhouse ‘mineral’ soils, and Stonewool artificial mineral wool substrate (vertical and horizontal measurement).

If the WET Sensor is used with a GP1 Logger or GP2 logger it will be equipped by default with calibrations for generic mineral soils, organic soils, sand soils and clay soils. Two additional calibration upgrade packs are available – one of which contains calibrations for coir (coco fibre), peat based potting mixes, and greenhouse mineral soils, and one which contains Stonewool artificial wool substrate (vertical and horizontal measurement). See the accessories section of this page for more details.

WET Kit and standalone WET Sensor options

WET KIT and WET-2 Sensor Specification：