Micro-Diver Water Level Gauge/Monitor

Micro-Diver Water Level Gauge/Monitor Description：

Product Manual Technology Sheets Brochures

Measuring only 88 mm (3.46″) in length and 18 mm (0.71″) in diameter, the Micro-Diver is Van Essen’s smallest Diver. The Micro-Diver® is a submersible datalogger for long-term, uninterrupted, real-time water level monitoring using a pressure sensor when submerged at a fixed level under the water surface. The pressure sensor measures the equivalent hydrostatic pressure of the water above the sensor diaphragm to calculate the total water depth. The Diver autonomously measures pressure and temperature and records them in its internal memory. The Diver is ideal for ground and surface water level applications.

The Micro-Diver is specifically designed for monitoring wells or drive-points too small to accommodate larger dataloggers. In addition to its compact size, the Micro-Diver’s memory capacity can store up to 48,000 measurements (date/time, pressure and temperature) – almost one measurement every ten minutes for an entire year.

The Micro-Diver has the following sample methods: fixed length intervals, event dependent, averaging and pumping test.

The Micro-Diver is available in the following pressure ranges: 10 m, 20 m, 50 m and 100 m..

Features

Compact size: Ø 18 mm – length 88 mm

48,000 records of time stamp, pressure and temperature

30-Point Pressure Factory Calibration

Pre-programmed and user defined pumping tests

Benefits

Fits ¾ inch drive points and piezometers

Event based, averaging and pumping tests sample methods to conserve memory

Cost effective frequent, long-term measuring

Reliable and accurate data

No need to search through extraneous data

Fits any application

Applications

Engineering and construction: Pump tests

Aquifer characterization: Pump and slug tests

Shallow water monitoring: Drive-points

Long-term groundwater monitoring: Small diameters wells

Micro-Diver Water Level Gauge/Monitor Specifications：