current position:home page>Products>Analysis Instrument>PST>

Compact Gas Chromatograph - LDetek MultiDetek2

Updated:2023-10-26

Brand: PST/LDetek
Model: MultiDetek2
Description: Designed for both industrial and laboratory use, MultiDetek2 measures multiple trace impurities, with many configurations possible in the same instrument. Based on the new generation of LDetek’s Plasm
Data download

Feedback
WeChat

QQ

Online Service

Product Details

Compact Gas Chromatograph - LDetek MultiDetek2 Description：

User's Manual Datasheet

Modular and Flexible Multi-Detector Configuration.

Features

Pre-configurable according to application requirements: ready-to-use device.

Stand-alone instrument for multiple trace impurity measurements.

Multiple detectors: PED, TCD and FID.

Wide measurement range covers sub-ppb to percent measurements.

PPB sensitivity with argon, helium or nitrogen carrier gas (PlasmaDetek)

Easy to use and maintain, with large touch screen interface, keyboard connection and easy access panel.

Ethernet connection allows remote operation.

Designed for both industrial and laboratory use, MultiDetek2 measures multiple trace impurities, with many configurations possible in the same instrument. Based on the new generation of LDetek’s Plasma Emission Detector, versions are also available featuring FID and TCD sensors to extend the measurement capabilities. MultiDetek2 uses argon, helium or nitrogen as carrier gases.

The wide operating range starts from sub-ppb up to % level measurements for maximum flexibility. The instrument is also designed for simple operation with a user-friendly 8.4” touch-screen interface and front opening door to allow easy access for maintenance.

The standard industrial compact GC model MultiDetek2 can also be integrated inside a stainless steel certified (ATEX-IECEx) purged enclosure to be used in Zone1 and Zone 2 hazardous areas.

Specifications

DETECTOR TYPE	PED, TCD, FID
Standard Features	Manual or auto-ranging (user selectable) Microprocessor controlled Windows 7 embedded user-friendly interface Ethernet port for remote control Isothermal and/or programmable ramping ovens Electronic flow control regulators for carrier & sample gases 8.4'' LCD large touch screen Self diagnosis system with auto-resolve alarm 4-20 mA isolated outputs Alarm Historic Digital system status output for remote monitoring (dry relay contact) 2 alarms contact High resolution Chromatogram output
Options	Serial communication (RS232/485) / Profibus / Modbus / Ethernet Compact purifier attached to the chassis for generating high purity carrier gas Integrated stream selector system Digital inputs for remote starting Analog inputs for connecting external instruments Remote control for stream selector (LDGSS) Purged zones for hazardous gases Heated zones to avoid cold points Monitoring system for hazardous gases Split/split less injector (can be heated) Integrated dilution system
Gas Connections	1/8'' or 1/4'' VCR or compression fittings
Carrier Pressure Requirements	100 PSIG
Operating Temperature	10 °C to 45 °C
Supply	115 VAC, 50 – 60 Hz or 220 VAC, 50 – 60 Hz
Power Consumption	Maximum 500W
Repeatability	Three times the percentage of deviation (3*CV %) of each component has to be smaller than 5% on ten consecutive cycles
LDL	3 times noise level
LOQ	3 times LDL value
Long Term Stability & DRIFT	Three times the percentage of deviation (3*CV %) of each component has to be smaller than 10% for 8 hours
Linearity	For 5 points within the measuring range, the linear curve must have its R2 at a value between 0.998 and 1.00