Updated:2023-05-08
Views:1040
Online Service
The SIL-111 is an unamplified analog sensor with a voltage output and high-quality cable terminating in pre-tinned pigtail leads for easy connection to dataloggers and controllers. The sensor has a 22° half-angle field of view and a response time of 0.6 seconds. Typical applications include plant canopy temperature measurement for use in plant water status estimation, road surface temperature measurement of determination of icing conditions, and terrestrial surface (soil, vegetation, water, snow) temperature measurement in energy balance studies.
SIL-111 Drawing
Approximate Sensitivity | 50 µV per C difference between target and detector temperature |
Output from Thermopile | Approximately -3.3 to 3.3 mV for a temperature difference from -55 to 55 C |
Output from Thermistor | 0 to 2500 mV (typical, depends on input voltage) |
Input Voltage Requirement | 2500 mV excitation (typical, other voltages can be used) |
Calibration Uncertainty (0 to 50 C), when target and detector temperature are within 20 C | 0.5 C |
Measurement Repeatability | Less than 0.05 C |
Stability (Long-term Drift) | Less than 2 % change in slope per year when germanium filter is maintained in a clean condition |
Response Time | 0.6 s, time for detector signal to reach 95 % following a step change |
Field of View | 22° half angle |
Spectral Range | 8 to 14 µm; atmospheric window |
Operating Environment | -50 to 80 C; 0 to 100 % relative humidity (non-condensing) |
Dimensions | 23 mm diameter, 60 mm length |
Mass | 190 g (with 5m of lead wire) |
Cable | 5 m of six conductor, shielded, twisted-pair wire; TPR jacket (high water resistance, high UV stability, flexibility in cold conditions); pigtail lead wires |
Warranty | 4 years against defects in materials and workmanship |
Customer Service QQ
Customer Hotline:
Technical Supports