Updated:2024-03-18
Views:885
Online Service
Mightex USB 2.0 cameras with frame buffers are optimized for machine-vision applications, and they can also be used for a wide variety of other applications such as digital microscopy and medical imaging, where quality, ease of use, and cost-effectiveness are crucial. These cameras have built-in frame buffers, external trigger-in, strobe-out, and a powerful camera engine that supports multiple cameras. Monochrome cameras often exhibit a 20% higher spatial resolution than their color counterparts because no pixel interpolation is necessary. Without a Bayer color filter on the sensor, monochrome cameras are also more sensitive than color sensors, especially in near IR and UV regions. The frame rate can be as high as 12 fps in full resolution and up to 150 fps using ROI mode. In addition, a user-friendly GUI based application software and an SDK are provided for custom software development. A DirectShow driver and a TWAIN driver are included, and a USB command set protocol is also provided for non-Windows based applications.
Features:
No glass window
Ideal for coherent light detection
32MB On-board Memory
Higher resolution than color sensors
10-bit gray level
4-pin GPIOs
Higher sensitivity especially in IR
Simpler data processing
1280 x 1024 active imaging pixels
High-speed USB2.0 (480Mb/s)
ROI & pixel skipping/binning
Support arbitrary ROI
Digital output, no need for frame grabber
Custom programmable with SDK provided
TWAIN driver
DirectShow driver
External and software trigger
Strobe output for external flash
No need for external power supply
Applications:
Laser beam profiling
Laser interferometry
Digital holography
Holographic data storage
Digital microscopy
Machine vision
Medical imaging
Semiconductor equipment
Test instruments
Parameters |
BTE-B013-UW BTE-B013-UWS |
Unit |
Board-Level/Enclosed | Enclosed | |
Number of GPIOs | 4 | |
Built-in LED Drivers | No | |
Resolution | 1,280 x 1,024 Monochrome | |
CMOS Chip | ½" (5:4) Micron MT9M001 | |
Pixel Size | 5.2 x 5.2 | μm |
Active Imager Size | 6.66 x 5.32 | mm |
Scanning System | Progressive | |
Dynamic Range | 68 | dB |
Sensor SNR | 45 | dB |
Gray Level | 10 | bit |
Responsivity | 2.1 | V/lux-sec |
Frame Rates* (@48MHz Clock) |
12 @1280x1024 18 @1024x768 25 @800x600 28 @752x480 33 @640x480 70 @320x240 |
fps |
Sub Resolutions | Support arbitrary ROI, (X, Y) with X and Y multiples of 4 | |
Shutter Speed (Exposure Time) | 0.04 ~ 750 | ms |
Hardware Gains | 0.125x ~ 8x | |
Trigger Mode | With external trigger | |
Trigger Cable | ACC-CAM-DIN8 | |
Lens Mount | C-Mount, CS-Mount or custom-defined | |
Built-in Filters | None | |
Power Consumption | < 1.8 | W |
Dimension |
58 x 58 x 34 (CS-mount) 58 x 58 x 39 (C-mount) |
mm |
Weight (excluding lens) | 150 | g |
* The actual achievable frame rate may vary, depending on exposure time setting as well as available PC resources.
Customer Service QQ
Customer Hotline:
Technical Supports