CPT2500 USB pressure sensor

CPT2500 USB pressure sensor Description：

Operating Instruction #1 Operating Instruction #2

Extensive application possibilities

The model CPT2500 USB pressure sensor can be connected to any PC with a USB interface, via the model CPA2500 USB adapter.For the USB adapter, there are stainless steel pressure sensors with measuring ranges up to 1,000 bar [14,500 psi] available. The USB adapter automatically recognises the measuring range of the connected pressure sensor and guarantees a high-accuracy pressure measurement.

Functionality

The measuring interval for pressure recording can be set in the range from 1 ms ... 10 s. With a recording interval of more than 5 ms the following data is recorded in addition to the current measured value:

the mean value over the recording interval

the maximum and minimum values during the recording interval

Thus pressure spikes within the overall recording interval can be very easily identified. It is also possible to set start and stop conditions for the recording. In this way it is possible to detect pressure spikes with a resolution of up to 1 ms.

Software

The USB-ScanSoft software can be downloaded free of charge from the website. With it, all settings for recording the pressure profiles can be made. The recorded measured values can be graphically displayed and evaluated.

Apart from the USB-ScanSoft software, the WIKA-Cal calibration software is available for calibration tasks. Using this software, the data is automatically transferred into a printable calibration certificate. WIKA-Cal also offers, over and above PC-supported calibration, the management of the calibration and instrument data, and data transfer via a USB interface.

Applications

Calibration service companies and service industry

Quality assurance

Recording and monitoring of pressure profiles

Pressure spike measurement

Special features

Recording interval adjustable from 1 ms ... 10 s

Measuring ranges from -600 ... 0 mbar to 0 … 1,000 bar [-9 ... 0 psi to 0 ... 14,500 psi]

Accuracy: 0.2 %, optionally 0.1 % (incl. calibration certificate)

No external voltage supply required

Software for recording of the measured value, calibration and evaluation