Updated:2024-03-14
Views:974
Online Service
Mightex USB 2.0 CCD cameras with frame buffers are optimized for machine-vision applications, and they can also be used for a wide variety of other applications such as digital microscopy and medical imaging, where quality, ease of use, and cost-effectiveness are crucial. These cameras have built-in frame buffers, external trigger-in, strobe-out, and a powerful camera engine that supports multiple cameras. Monochrome cameras often exhibit 20% higher spatial resolution than their color counterparts because no pixel interpolation is necessary. Without a Bayer color filter on the sensor, monochrome cameras are also more sensitive than color sensors especially in near IR and UV regions. Frame rate can be as high as 15 fps in full resolution and up to 80 fps using ROI mode. In addition, a user-friendly GUI based application software and an SDK are provided for custom software development. A USB command set protocol is also provided for non-Windows based applications.
FEATURES
Built-in frame buffer (8 frames at full resolution)
Support multi-camera applications
4 GPIO pins
Higher sensitivity than color cameras
1392×1040 active imaging pixels
Ultra compact
High-speed USB 2.0 (480Mb/s)
Digital output, no need for frame grabber
Full featured SDK
Compatible with Windows 2000, XP, Vista, Windows 7/8/10
USB protocol for non-Windows based applications
DirectShow, TWAIN and Linux drivers
External and software trigger
Strobe output for external flash
ROI & pixel skipping/binning
No need for external power supply
OEM versions available
APPLICATIONS
Machine vision
Fluorescence imaging
Digital microscopy
Medical imaging
Semiconductor equipment
Test instruments
High-quality ID photo capture
Document scanners
2D barcode readers
Security camera
Astrophotography
Parameters | CXE-C013-U | Unit |
Board-Level/Enclosed | Enclosed | |
Number of GPIOs | 4 | |
Resolution | 1,392 x 1,040 Color | |
Bit | 8/12 | bit |
CCD Chip | 2/3" Sony ICX285AQ, Global Shutter | |
Pixel Size | 6.45 x 6.45 | μm |
Active Imager Size | (Diagonal) 11.0 | mm |
Scanning System | Progressive | |
Frame Rates* (@28MHz Clock) |
15 @1392 x 1040 29 @696 x 520 (2x2 Bin) 37 @464 x 344 (3x3 Bin) 49 @348 x 256 (4x4 Bin) 49 @348 x 256 (1:4 Skip) |
fps |
Sub Resolutions | 696 x 520(2x2 Bin), 464 x 344 (3x3 Bin), 348 x 256 (4x4 Bin),348 x 256 (1:4 Skip) | |
Shutter Speed (Exposure Time) | 0.05 ~ 200,000 | ms |
Hardware Gains | 6 ~ 43 | dB |
Trigger Mode | With external trigger | |
Trigger Cable | ACC-CAM-DIN8 | |
Trigger Delay | < 25 | μs |
Strobe Out | Yes | |
Lens Mount | CS– mount or C-mount | |
Built-in Filters | IR-cut (factory standard), or IR-pass, or no filter | |
Power Consumption | < 1.8 | W |
Dimension |
95 x 70 x 38.5 (CS-mount) 95 x 70 x 43.5 (C-mount) |
mm |
Weight (excluding lens) | 150 | g |
* The actual achievable frame rate depends on exposure time, as well as resources available from the PC system.
Customer Service QQ
Customer Hotline:
Technical Supports