Updated:2024-03-14
Views:990
Online Service
Mightex USB 2.0 cameras with frame buffers and global shutter are optimized for machine-vision applications, and they can also be used for a wide variety of other applications such as digital microscopy and medical imaging, where quality, ease of use, and cost-effectiveness are crucial. These cameras have built-in frame buffers, global shutter, external trigger-in, strobe-out, and a powerful camera engine that supports multiple cameras. The frame rate can be as high as 60 fps in full resolution and up to 600 fps using ROI mode. These cameras also have a DirectShow driver and TWAIN driver. In addition, a user-friendly GUI based application software and an SDK are provided for custom software development. A USB command set protocol is also provided for non-Windows based applications. A Linux driver is also available upon request.
Features:
32MB On-board Memory (23 frames @ 8bit and 4 frames @ 10bit at full resolution)
True Global Shutter
Support simultaneous image capturing from multiple cameras
4-pin GPIOs
752×480 active imaging pixels
Arbitrary ROI supported
Ultra compact
High-speed USB2.0 (480Mb/s)
Digital output, no need for frame grabber
Custom programmable with SDK provided
DirectShow driver
TWAIN driver
Linux driver
USB command set protocol for non-Windows-based applications
External and software trigger
Strobe output for external flash
Precise Frame Rate Setting
Pixel skipping/binning
No need for external power supply
OEM versions available
Applications:
Machine vision and stereo vision
Medical imaging
Semiconductor equipment
Test instruments
High-quality ID photo capture
Document scanners
Digital microscopy
Web camera and security video
Parameters |
BTN-BG04-U (C-mount) BTN-BG04-US (CS-mount) |
BTE-BG04-U (C-mount) BTE-BG04-US (CS-mount) |
Unit |
Board-Level/Enclosed | Board-Level | Enclosed | |
Number of GPIOs | 4 | 4 | |
Resolution | 752 x 480 Monochrome | ||
CMOS Chip | 1/3" Micron MT9V032, Global Shutter (Micron TrueSNAP) | ||
Pixel Size | 6.0 x 6.0 | μm | |
Scanning System | Progressive | ||
Dynamic Range | > 55 | dB | |
Gray Level | 10 | bit | |
Responsivity | 4.8 | V/lux-sec | |
On-Board Memory | 32 | MB | |
Frame Rates* (@26MHz Clock) |
8-bit operation 60@752x480, 65@640x480, 130@320x240, 220@160x120, 310@64 x 64 |
10-bit operation 36@752x480, 44@640x480, 130@320x240, 220@160x120, 310@64 x 64 |
fps |
Sub Resolutions | Support Arbitrary ROI (Nx, Ny), with Nx and Ny multiples of 4 | ||
Shutter Speed (Exposure Time) | 0.05 ~ 750 | ms | |
Hardware Gains | 1x ~ 4x | ||
Trigger Mode | With external trigger | ||
Trigger Cable | ACC-CAM-DIN8 | ||
Strobe Out | Yes | ||
Lens Mount | C– mount or CS-mount (M12.5-mount or custom-defined lens mount supported) | ||
Built-in Filters | No filter, IR-cut (standard), or IR-pass | ||
Power Consumption | < 1.8 | W | |
Dimension | 51 x 51 x 29 (CS-mount) 51 x 51 x 34 (C-mount) | 58 x 58 x 34 (CS-mount) 58 x 58 x 39 (C-mount) | mm |
Weight (excluding lens) | 80 | 150 | g |
* The actual achievable frame rate may vary, depending on exposure time setting as well as available PC resources.
Customer Service QQ
Customer Hotline:
Technical Supports