Updated:2024-03-13
Views:909
Online Service
Mightex S-series compact USB 2.0 cameras with global shutter are optimized for machine-vision applications, and they can also be used for a wide variety of other applications such as digital microscopy and medical imaging, where quality, ease of use, and cost-effectiveness are crucial. These cameras have global shutter, external trigger-in, strobe-out, and a powerful camera engine that supports multiple cameras. Frame rate can be as high as 38 fps in full resolution and up to 210 fps using ROI mode. In addition, a user-friendly GUI based application software and an SDK are provided for custom software development. A USB command set protocol is also provided for non-Windows based applications.
Features
Ultra compact
4-pin GPIOs
752×480 active imaging pixels
High-speed USB2.0 (480Mb/s)
Digital output, no need for a frame grabber
Custom programmable with SDK provided
DirectShow and TWAIN driver
USB command set for non-Windows based applications
Linux Driver
External and software trig-ger
Strobe output for external flash
ROI & pixel skipping/binning
No need for external power supply
OEM versions available
Applications
Digital microscopy
Machine vision
Medical imaging
Semiconductor equipment
Test instruments
Document scanners
2D barcode readers
Parameters | SCN-CG04-U | SCE-CG04-U | Unit |
Board-Level/Enclosed | Board-Level | Enclosed | |
Number of GPIOs | 4 | 4 | |
Resolution | 752 x 480 Color | ||
CMOS Chip | 1/3" Micron MT9V032, Global Shutter (Micron TrueSNAP) | ||
Pixel Size | 6.0 x 6.0 | µm | |
Active Imager Size | 4.51 x 2.88 | mm | |
Scanning System | Progressive | ||
Dynamic Range | > 55 | dB | |
Gray Level | 8 | bit | |
Responsivity | 4.8 | V/lux-sec | |
Frame Rates* (@24MHz Clock) |
38 @752 x 480 40 @640 x 480 82 @320 x 240 130 @160 x 120 170 @64 x 64 |
fps | |
Sub Resolutions | Support Arbitrary ROI (Nx, Ny), with Nx and Ny multiples of 4 | ||
Shutter Speed (Exposure Time) | 0.05 ~ 750 | ms | |
Hardware Gains | 1x ~ 4x | ||
Trigger Mode | With external trigger | ||
Trigger Cable | ACC-CAM-CON8 | ||
Strobe Out | Yes | ||
Lens Mount |
C– mount or CS-mount (M12.5-mount or custom-defined lens mount supported) |
||
Built-in Filters | IR-cut (factory standard), No filter, or IR-pass | ||
Power Consumption | < 1.0 | W | |
Dimension |
40 x 40 x 25 (CS-mount) 40 x 40 x 30 (C-mount) |
45 x 45 x 23 (CS-mount) 45 x 45 x 28 (C-mount) |
mm |
Weight (excluding lens) | 60 | 120 | g |
* The actual achievable frame rate depends on exposure time, as well as available resources of the PC host system.
Customer Service QQ
Customer Hotline:
Technical Supports