Updated:2024-03-13
Views:831
Online Service
Mightex S-Series compact USB 2.0 cameras are optimized for machine-vision applications, and they can also be used for a wide variety of other applications such as digital microscopy and medical imaging, where quality, ease of use, and cost-effectiveness are crucial. These cameras have external trigger-in, strobe-out, and GPIOs. Monochrome cameras often exhibit 20% higher spatial resolution than their color counterparts because no pixel interpolation is necessary. Without a Bayer color filter on the sensor, monochrome cameras are also more sensitive than color sensors especially in near IR and UV regions. Frame rate can be as high as 20 fps in full resolution and up to 150 fps using ROI mode. In addition, a user-friendly GUI based application software and an SDK are provided for custom software development. A USB command set protocol is also provided for non-Windows based applications.
Features
Ultra compact
4-pin GPIOs
Higher sensitivity than color cameras
1280×1024 active imaging pixels
High-speed USB2.0 (480Mb/s)
Digital output, no need for a frame grabber
Custom programmable with SDK provided
DirectShow and TWAIN driver
Linux Driver
External and software trigger
Strobe output for external flash
ROI & pixel skipping
No need for external power supply
OEM versions available
Applications
Digital microscopy
Machine vision
Medical imaging
Semiconductor equipment
Test instruments
Document scanners
2D barcode readers
Parameters | SCN-B013-U | SCE-B013-U | Unit |
Board-Level/Enclosed | Board-Level | Enclosed | |
Number of GPIOs | 4 | 4 | |
Resolution | 1,280 x 1,024 Monochrome | ||
CMOS Chip | ½" (5:4) Micron MT9M001, Rolling Shutter | ||
Pixel Size | 5.2 x 5.2 | µm | |
Active Imager Size | 6.66 x 5.32 | mm | |
Scanning System | Progressive | ||
Dynamic Range | 68 | dB | |
Sensor SNR | 45 | dB | |
Gray Level | 8 | bit | |
Responsivity | 2.1 | V/lux-sec | |
Frame Rates* (@48MHz Clock) |
20 @1280 x 1024 31 @1024 x 768 45 @800 x 600 52 @752 x 480 52 @640 x 480 120 @320 x 240 |
fps | |
Sub Resolutions | Support Arbitrary ROI (Nx, Ny), with Nx and Ny multiples of 4 | ||
Shutter Speed (Exposure Time) | 1 ~ 750 | ms | |
Hardware Gains | 0.125x ~ 8x | ||
Trigger Mode | With external trigger | ||
Trigger Cable | ACC-CAM-CON8 | ||
Strobe Out | Yes | ||
Lens Mount |
C– mount or CS-mount (M12.5-mount or custom-defined lens mount supported) |
||
Built-in Filters | IR-cut (factory standard), No filter, or IR-pass | ||
Power Consumption | < 1.0 | W | |
Dimension |
40 x 40 x 25 (CS-mount) 40 x 40 x 30 (C-mount) |
45 x 45 x 23 (CS-mount) 45 x 45 x 28 (C-mount) |
mm |
Weight (excluding lens) | 60 | 120 | g |
* The actual achievable frame rate depends on exposure time, as well as resources of PC system.
Customer Service QQ
Customer Hotline:
Technical Supports